branding

STELZNER® agricultural measurement systems

For measuring the pH in soils and liquids, use our pH-AGRAR 2000 for monitoring crop

pH AGRAR 2000 Set

for measuring pH either directly on-site in the soil or in the lab

The pH AGRAR 2000 is an important tool for monitoring crop nourishment. Plants grow optimally when a pH value is maintained specifically for that specific plant type. The absorption of certain main nutrients can be hindered if the the pH value is either too high or too low. The technical manual delivered with your Stelzner product contains a detailed list of optimal plant-specific pH values.

The new microprocessor-controlled pH AGRAR 2000 is easy to handle and very precise. It also features a piercing electrode made from glass that is custom designed for agriculture. This makes it the perfect device for agricultural measurements. It features straight-forward pH4 and pH7 automatic calibration. The electrode conductivity slope is displayed (in mV/pH) on the device so that you can check the sensitivity of the pH electrode. An alert is displayed if the pH electrode sensitivity is too low. You can still take measurements when the sensitivity is reduced but you should replace the pH electrode with a new one as soon as possible. Our special pH piercing electrode made from glass features three ceramic diaphragms and a liquid electrolyte. The electrolyte prevents the diaphragms from becoming clogged up with soil. This increases the durability and lifespan of the entire unit. The base unit is enclosed in a sturdy housing that is built to withstand the most demanding requirements of field and lab use.

The pH AGRAR 2000 can be used for direct crop measurements or also for checking substrates, fertilizer solutions and even water quality.

ARTICLE AND PRIZES
Art.-Nr.
Article
Cart
30003002 pH AGRAR 2000 complete with case € 535,50
pH AGRAR 2000 with pH piercing electrode made from glass, pH4 and pH7 buffer solutions, KCl refill solution with filler syringe, CaCI2 powder for analysing soil solutions, piercing pin, spray bottle with deionised water, technical manual
30003003 pH AGRAR 2000, base unit without electrode € 297,50
Art.-Nr. Article Accessories Cart
30003019 One nine-volt battery € 2,98
One nine-volt battery, size 6LR61
30001004 Spritzflasche mit entionisiertem Wasser € 7,14
250ml
30002014 Beaker for measuring volume, 100 ml with cover € 3,57
30003004 1 metre attached cable with BNC plug for pH piercing electrode made of glass Article No. 3033 € 41,65
30003010 pH plastic electrode for liquids only, with gel electrolyte, 1 metre attached cable with BNC plug € 113,05
for liquids only, with gel electrolyte, 1 metre attached cable with BNC plug
30003011 pH-Glaseinstechelektrode mit drei Diaphragmen, 3 mol/l KCl, 1 m Festkabel mit BNC-Stecker € 176,12
with three diaphragms, 3 mol/l KCl, 1 metre attached cable with BNC plug
30003012 pH 4.0 buffer solution 100 ml bottle € 7,91
30003013 pH 7.0 buffer solution 100 ml bottle € 7,91
30003014 pH 4.0 buffer solution 1000 ml bottle € 44,03
30003015 pH 7.0 buffer solution 1000 ml bottle € 44,03
30003016 Buffering tablets for calibration solutions 2 x 5 tablets for pH 4 and pH 7 € 25,17
Dissolve 1 tablet in 100 ml distilled water. Dissolve in water.
30003017 Dibble € 2,38
30003022 Refill solution with filler syringe for pH electrodes: 3 mol/l KCl, 100 ml bottle € 7,91
30003026 Buffering tablets for calibration solutions 5 tablets for pH 4 € 13,09
Dissolve 1 tablet in 100 ml distilled water. Dissolve in water.
30003027 Buffering tablets for calibration solutions 5 tablets for pH 7 € 13,09
Dissolve 1 tablet in 100 ml distilled water. Dissolve in water.
30003028 Cap for pH electrodes € 2,38
30003033 pH piercing electrode made of glass with three diaphragms, mol/l KCl, without cable € 136,85
with three diaphragms, mol/l KCl, without cable
30000504 Calcium chloride (CaCl2) for soil analysis (approx. 11.1 g for 10 litres of 0.01 mol/l) € 5,95
30000505 Calcium chloride (CaCl2) for soil analysis (approx. 100 g) € 35,11
Show Cart
TECHNICAL DATA
Measurement range: 0 to 14
Resolution: 0.01
Precision:
± 0.02
Display: Liquid crystal display
Operating temperature: +5 to +45 °C
Power supply: One nine-volt battery,
size 6LR61
Service life: approx. 100 hours
Protection degree:
IP40
Dimensions and weight: 125 x 75 x 45 mm, 190 g
Dimensions and weight with case:
370 x 290 x 90 mm,
approx. 3.0 kg
product

Classic plug-in tensiometer

A tensiometer is used to measure suction tension. The porous cell of the tensiometer uses capillary action to transport water outwards into the drier soil. A negative pressure is then created within the closed pipe. This negative... ...more Topseller

Consumers are shown prices including VAT (gross), and companies are shown prices excluding VAT (net).