Gas Analysis technology

SSM 6000 trace gas analyser for measuring hydrogen sulphide in the ppb range: to protect adjacent facility components (e.g. catalytic converters) from H₂S.

• highly sensitive analysis system with a cycle time of approximately two to five minutes (depending on the application)
• optionally available: additional oxygen trace gas analyser with a measuring range of 10 ppm O₂
• complete with installed pipes on mounting plate

TECHNICAL DATA
Mounting plate dimensions (WxHxD): 900 x 500 x 350 mm
Protection: IP20
Measuring range:  H₂S: 0 to 2.000 ppb
Detection limit:  H₂S: 5 ppb
Resolution: H₂S: 1 ppb
Display: LED display for measuring values and LC display
Communication:    RS232, optionally Profibus DP
Operating temperature: +5 to +40 ° C
Power supply: 85 to 264 VAC, 47 to 63 Hz



Emissionmeasuringsystemforautomaticrecordingof carbonmonoxide,carbondioxide,nitrogenmonoxide, ammonia,watervapourandoxygenconcentrations.

• continuousmonitoringatthreemeasuringpointsinawaste incinerationplant(high-dustrange)
• indoorinstallationwithairconditioning
• gaspreparationwithcompressorcoolerandvariousfilters
• statusmoduleformonitoringanddisplayofoperatingstatus
• heatedsampleprobewithblowbackandpre-heated airpurging
• monitoringofoxygenconcentrationwithIn-Situ-ZrO₂-probes   
• integratedpurgingsupplyforZrO₂-probesinsidethecabinet
• measurementofammoniaandwatervapourwithIn-Situ-Laser-Spectrometer

TECHNICAL DATA
System housing: GRP cabinet with front door and window
Housing dimensions (WxHxD):  840  x  2,100   x  620 mm
Protection: IP55
Housing color: RAL 7032
Measuring components: CO, CO₂, NO, 3x O₂, NH₃, H₂O

Measuring system for automatic recording of nitrogen monoxide concentrations of flue gases at up to 4 sample points for the control of a DeNO_X-stage.

• heated sample gas probes and sample gas lines
• gas conditioning with compressor coolers and various filters
• status modules for monitoring and display of operating status
• air conditioned cabinet housing for outdoor installation
• cabinet housing made of glass fibre reinforced plastic for inshore installation
• integrated sample gas conditioning for trouble-free measurement with high sulphur oxide concentrations
• links to higher process control via Profibus
• NO/ NO₂-converter for higher NO₂ concentrations available

TECHNICAL DATA
System housing:  GRP cabinet with front doors and windows (optionally sun protection roof)
Housing dimensions (WxHxD):  1,800  x  2,200  x  900 mm
Protection: IP55
Housing color: RAL 7032
Measuring components: NO_X, (4x)

Emission measuring system for automatic monitoring and registration of carbon monoxide, carbon dioxide, nitrogen monoxidean doxygen concentrations as well as volume flow, pressureand temperature.

• Continuous Emissions Monitoring Systems (CEMS) at two gas turbines from a natural gasreservoir
• outdoor installation with air conditioning, heated sample lines with ATEX approval for Ex zone 2
• gas conditioning with compressor cooler and various filters
• status modules for monitoring and display of operating status
• Data Acquisition Handling System (DAHS) with remote control and additional data transfer to the Prozess Control System (PCS)

TECHNISCHE DATEN
System housing: GRP cabinet with front doors and windows and sunroof
Housing dimensions (WxHxD): 840  x  2,100 x  600/500 mm
Protection: IP55
Housing color: RAL 7032
Measuring components: CO, CO₂, NO, O₂, volume flow, pressure, temperature

Measuring system for automatic measurement of hydrogen, carbon monoxide and oxygen concentrations as well as dust concentration of a carbide furnace

• continuous measurement of the process at additional measuring place to monitor the inertisation with redundant equipment
• outdoor installation with heating, measuring lines and most parts of the gas conditioning system in ATEX Ex zone 2
• all gas lines made of stainless steel
• monitoring of the cabinet with gas warning sytem for safety shutdown
• gas conditioning with compressor cooler and various filters as well as additional equipment for separation of tar and aerosols
• status modules for monitoring and display of operating status
• placement of test gas cylinders inside the cabinet for automatic calibration
• high temperature (400° C) dust monitor

TECHNICAL DATA
System housing:  GRP cabinet with front door and window
Housing dimensions (WxHxD):  1,250  x  2,100  x  620 mm
Protection: IP55
Housing color: RAL 7032
Measuring components: CO, H₂, 3x O₂, dust

Measuring system for automatic measurement of carbon monoxide CO, carbon dioxide CO2, oxygen O2, total hydrocarbons Cges and water vapor H2OD concentration in hydrogen as product gas quality monitoring of a steam-reforming-plant.

• model designed for installation in Ex zone 2
• all gas lines made of stainless steel tubing for sample gas pressures up to 40  bar
• lowest measuring ranges 10ppm
• test gas cylinders placed inside the cabinet for automatic calibration of CO, CO₂, C_ges
• air conditioned (cooling / heating) cabinet housing for outdoor installation in the field and ambient temperatures ranging from −20 to +40° C
• cabinet housing made of glass fibre reinforced plastic for inshore installation
• stainless steel plinth with laces for base attachment
• optionally sun protection roof for installations with direct sun impact

TECHNICAL DATA
System housing: GRP cabinet with front doors and windows (optionally sun protection roof)
Housing dimensions (WxHxD): 2,200 x 2,150 x 950 mm
Protection: IP55
Housing color: RAL 7032
Measuring components: CO, CO₂, O₂, H2O, C_ges

Measuring system for automatic measurement of carbon monoxide concentration in hydrogen as product gas quality monitoring of a steam-reforming-plant

• ATEX-model for installation in Ex zone 2 (Cat. 3G) or Ex zone 1 (Cat. 2G)
• all gas lines made of stainless steel tubing for sample gas pressures up to 40  bar
• lowest measuring range 10ppm CO
• test gas cylinders placed inside the cabinet for automatic calibration
• cabinet with heating/forced ventilation for field installation and ambient temperatures ranging from –20 to +40° C
• cabinet housing made of glass fibre reinforced plastic for inshore installation
• stainless steel plinth with laces for base attachment
• optionally sun protection roof for installations with direct sun impact

TECHNICAL DATA
System housing: GRP cabinet with front doors and windows (optionally sun protection roof)
Housing dimensions (WxHxD):  1,100  x  2,100  x  600 mm
Protection: IP55
Housing color: RAL 7035
Measuring components: CO

Measuring system for automatic recording of carbon monoxide, carbon dioxide, nitrogen monoxide, hydrogen and methane concentrations of flue gases of e. g. fuel cell and catalyzer test benches

• gas conditioning with compressor cooler and various filters
• status module for monitoring and display of operating status
• automatic calibration with integrated calibration cells and nitrogen
• cabinet on wheels for easy transport to different sample points
• back door for trouble-free access to the systems components for maintenance purposes
• LAN-interface for linking the system to an existing IT-network

TECHNICAL DATA
System housing: Steel sheet cabinet with open front frame
Housing dimensions (WxHxD):  600 x 1,800 x 600 mm
Protection: IP20
Housing color: RAL 7035
Measuring components: CO, CO₂, NO, H₂, CH₄

Continuous LEL monitoring at a process furnace for the combustible gases methanol CH3OH, methane CH4, hydrogen H₂ and carbon monoxide CO.

• system is for outdoor installation in the chemical industry
• cabinet with heating/forced ventilation for field installation and ambient temperatures ranging from –20 to +40°C
• cabinet housing made of glass fibre reinforced plastic for installation outdoors at the chemical industry
• optional sun protection roof for installation against direct sun impact

TECHNICAL DATA
System housing: GRP cabinet with front doors and windows (optionally sun protection roof)
Housing dimensions (WxHxD):  850 x 1,050 x 350 mm
Protection: IP55
Housing color: RAL 7035
Measuring components: H₂, CH₃OH, CH₄, CO