STELZNER® agricultural measurement systems

Our advisory kits for measuring pH: the pH AGRAR 2000, the PET 2000 for measuring nutrient salt intake, the MULTI ISE for determining individual nutrients, the EC 2000 for measuring conductivity, the PE Controller for monitoring crop nutrients, the MULTI 2000 for measuring activity, conductivity and temperature, and the Type-X, Type-V, Type-VII and Type-III combination kits

Type-VII advisory kit

For measuring pH and conductivity

The Type-VII combination kit consists of two instruments: the ph AGRAR 2000 for measuring pH in soil and liquids and the EC 2000 for measuring conductivity in liquids.

These two instruments are your ideal companions when monitoring the fertilization of hydroponic crops. The pH AGRAR 2000 allows you to monitor the pH. This microprocessor-controlled meter enables you to make quick and precise measurements in solutions such as irrigation water and fertilizer solutions. A glass pH piercing electrode allows you to determine the pH level directly in the soil or substratum. The meter features automatic calibration.

It displays the electrode conductivity slope for monitoring the glass pH piercing electrode. A warning tone is emitted if the sensitivity level is too low. The sturdy housing is built for the rough conditions of agricultural field work. The EC 2000 is used to measure conductivity. EC value analysis is a critical component in fertilization, soil-free cultivation, closed cultivation, hydroponics, or salt-sensitive crops.

With its ability to measure up to 200 mS/cm with the glass-platinum conductivity electrode, the
EC 2000 is also suitable for monitoring basis solutions. It is temperature compensated and equipped with a specific conductivity electrode with integrated temperature probe.

30001700 Type-VII advisory kit € 850,85
pH AGRAR 2000 and EC 2000 pH AGRAR 2000 with pH piercing electrode made from glass, pH 4 and pH 7 buffer solutions, KCl refill solution with filler syringe, CaCl2 powder for analysing soil solutions, piercing pin, spray bottle with deionised water, EC 2000 with carbon conductivity electrode, calibration solution (1.4 mS/cm and 12.88 mS/cm), technical manual
30001700-P Type-VII advisory kit € 916,30
Similar to the 1700, but with glass-platinum conductivity electrode for up to 200mS/cm
Art.-Nr. Article Accessories Cart
30001303 Calibration solution, 1.4 mS/cm 100 ml bottle € 7,91
30001304 Calibration solution, 111.8 mS/cm 100 ml bottle € 7,91
30001308 Calibration solution, 12.88 mS/cm 100 ml bottle € 7,91
other calibration solutions are available on request
30002014 Beaker for measuring volume, 100 ml with cover € 3,57
30003004 1 metre attached cable with BNC plug for pH piercing electrode made of glass Article No. 3033 € 41,65
30003011 pH-Glaseinstechelektrode mit drei Diaphragmen, 3 mol/l KCl, 1 m Festkabel mit BNC-Stecker € 176,12
with three diaphragms, 3 mol/l KCl, 1 metre attached cable with BNC plug
30003012 pH 4.0 buffer solution 100 ml bottle € 7,91
30003013 pH 7.0 buffer solution 100 ml bottle € 7,91
30003017 Dibble € 2,38
30003022 Refill solution with filler syringe for pH electrodes: 3 mol/l KCl, 100 ml bottle € 7,91
30003033 pH piercing electrode made of glass with three diaphragms, mol/l KCl, without cable € 136,85
with three diaphragms, mol/l KCl, without cable
30004093 Carbon conductivity electrode € 148,75
1 metre cable, temperature sensor NTC 10 K with miniature plug (5-pin), for EC 2000
30004195 Glass-platinum conductivity electrode € 201,11
1 metre cable, temperature sensor NTC 10 K with miniature plug (5-pin), for EC 2000
30004444 Technical manual € 23,20
Show Cart
  pH AGRAR 2000
Measurement range:
0 to 14

± 0.02

  EC 2000
Measurement range:

Conductivity: 0 to 20 or 200 mS/cm

Temperature: +5 to + 45°C


Conductivity: 0.1 mS/cm

Temperature: 0.1°C


Conductivity: 0 to 20 mS/cm ± 2 %

20 to 200 mS/cm ± 5 %

Temperature: ± 0.2°C

  Type-VII advisory kit
Dimensions and weight with case: 460 x 350 x 135 mm
    approx. 4.5 kg

Classic plug-in tensiometer

A tensiometer is used to measure suction tension. The porous cell of the tensiometer uses capillary action to transport water outwards into the drier soil. A negative pressure is then created within the closed pipe. This negative... ...more Topseller

Consumers are shown prices including VAT (gross), and companies are shown prices excluding VAT (net).